Buy Suzuki Outboard Parts

Announcement

Collapse
No announcement yet.

Engine light code 9-2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Engine light code 9-2

    Hi I have an Suzuki df115 -2016 With about 50h running time.
    Engine light blinks 9-2. Motor runs with no problems.
    Anybody knows that code?

  • #2
    Never heard of a 9-2 code. Are you sure that is what it is?.

    See the sticky thread on the forum re codes.

    Comment


    • #3
      9times pause 2times pause and so on. No buzzer

      Comment


      • #4
        I was looking at that sticky before. I didnt see 3-6 for 02 sensor

        Comment


        • #5
          3-6 is a relatively new code, since most outboards (excl V-6s) didn't have O2 sensors until recently.
          Last edited by Harper; 01-29-2017, 01:59 AM.
          Mike
          μολὼν λαβέ

          Comment


          • #6
            9-2 = Key-fob authentication error *1

            *check the key-fob battery
            *make sure key-fob is within range of control unit
            *make sure there are no objects blocking the radio signal between the fob and control unit
            *Make sure the key-fob is in communication mode
            *Make sure the key-fob is authenticated by the keyless system

            Keyless Start Codes are below:
            When codes 9-1, 9-2, 9-3, 9-4, 9-5, or 9-6 appears, the buzzer will not sound, and only the check "engine lamp" will flash according to each code pattern.
            Henry

            Comment


            • #7
              Thank you very much.

              Comment


              • #8
                No problem Macmahon.

                Moonlighter has posted a second PDF in his sticky on trouble codes; This code chart directly pertains to the available features on the DF100A, DF115A, & DF140A (Midrange Newer Motors).
                Last edited by Nayna32; 01-29-2017, 10:05 PM.
                Henry

                Comment


                • #9
                  Originally posted by Nayna32 View Post
                  9-2 = Key-fob authentication error *1

                  *check the key-fob battery
                  *make sure key-fob is within range of control unit
                  *make sure there are no objects blocking the radio signal between the fob and control unit
                  *Make sure the key-fob is in communication mode
                  *Make sure the key-fob is authenticated by the keyless system

                  Keyless Start Codes are below:
                  When codes 9-1, 9-2, 9-3, 9-4, 9-5, or 9-6 appears, the buzzer will not sound, and only the check "engine lamp" will flash according to each code pattern.
                  where can I check all the 9-x codes? It seems I cannot find anything on the internet about the meaning of these codes?

                  Comment


                  • #10
                    See the second pdf attached to the first post in this link:

                    http://www.suzukioutboardforum.com/f...agnostic-codes

                    Comment


                    • #11
                      Thank you. That is exactly what I needed👌

                      Comment

                      Working...
                      X