Tweet
2012 DF150 SMIS Gauge issue
To anyone who has purchased one of the new digital gauge packages for any of the new model DF series motors, I have some information for you that will save you some time and aggrivation when setting the gauge up. Make sure that you move the plug (on the front/lower port side) of the motor to the other connector (covered by a rubber shield). Put the rubber shield back on the other unused plug. One plug is for analog gauges and the other is for digital gauges. If you don't do the swap, you will get a "no devices found on buss" error and will not be able to get the gauge set up. The user manual doesnt say anything about this. Once the swap is made, Voila!!!