Buy Suzuki Outboard Parts

Announcement

Collapse
No announcement yet.

Engine light code 9-2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SeemOn
    replied
    Thank you. That is exactly what I needed👌

    Leave a comment:


  • Moonlighter
    replied
    See the second pdf attached to the first post in this link:

    http://www.suzukioutboardforum.com/f...agnostic-codes

    Leave a comment:


  • SeemOn
    replied
    Originally posted by Nayna32 View Post
    9-2 = Key-fob authentication error *1

    *check the key-fob battery
    *make sure key-fob is within range of control unit
    *make sure there are no objects blocking the radio signal between the fob and control unit
    *Make sure the key-fob is in communication mode
    *Make sure the key-fob is authenticated by the keyless system

    Keyless Start Codes are below:
    When codes 9-1, 9-2, 9-3, 9-4, 9-5, or 9-6 appears, the buzzer will not sound, and only the check "engine lamp" will flash according to each code pattern.
    where can I check all the 9-x codes? It seems I cannot find anything on the internet about the meaning of these codes?

    Leave a comment:


  • Nayna32
    replied
    No problem Macmahon.

    Moonlighter has posted a second PDF in his sticky on trouble codes; This code chart directly pertains to the available features on the DF100A, DF115A, & DF140A (Midrange Newer Motors).
    Last edited by Nayna32; 01-29-2017, 10:05 PM.

    Leave a comment:


  • Macmahon
    replied
    Thank you very much.

    Leave a comment:


  • Nayna32
    replied
    9-2 = Key-fob authentication error *1

    *check the key-fob battery
    *make sure key-fob is within range of control unit
    *make sure there are no objects blocking the radio signal between the fob and control unit
    *Make sure the key-fob is in communication mode
    *Make sure the key-fob is authenticated by the keyless system

    Keyless Start Codes are below:
    When codes 9-1, 9-2, 9-3, 9-4, 9-5, or 9-6 appears, the buzzer will not sound, and only the check "engine lamp" will flash according to each code pattern.

    Leave a comment:


  • Harper
    replied
    3-6 is a relatively new code, since most outboards (excl V-6s) didn't have O2 sensors until recently.
    Last edited by Harper; 01-29-2017, 01:59 AM.

    Leave a comment:


  • wilbur1
    replied
    I was looking at that sticky before. I didnt see 3-6 for 02 sensor

    Leave a comment:


  • Macmahon
    replied
    9times pause 2times pause and so on. No buzzer

    Leave a comment:


  • Moonlighter
    replied
    Never heard of a 9-2 code. Are you sure that is what it is?.

    See the sticky thread on the forum re codes.

    Leave a comment:


  • Macmahon
    started a topic Engine light code 9-2

    Engine light code 9-2

    Hi I have an Suzuki df115 -2016 With about 50h running time.
    Engine light blinks 9-2. Motor runs with no problems.
    Anybody knows that code?
Working...
X