Freddy jakob
Member
Last Activity: Yesterday, 06:12 PM
Joined: 08-15-2020
Location: Norway
-
Some pictures... -
Hi and thanks for the feedback Redlowrey. True as you say with osolyscope. I'll get one. The sound is bubbling since the engine is in a big "bucket"....Leave a comment:
-
Thought to ohm tps to see if it is dead spot but it does not say anything about this procedure in the manual. I know the values come up...Leave a comment:
-
pictures of sds logging...Leave a comment:
-
o2 sensor before engine gets hot
https://youtube.com/shorts/FaFk1Li44Xs?feature=share...Leave a comment:
-
Some troubleshooting today with sds. Has connected negative directly from ecu to negative on engine block since these went into a common negative circuit....Leave a comment:
-
Some photos...Leave a comment:
-
Some engine updates. Has done as redlowrey recommended by connecting power directly to the high pressure pump. The pressure on the pump was 39psi with...Last edited by Freddy jakob; 05-24-2022, 11:57 AM.Leave a comment:
-
Ecu part number
Questions about ecu to df115a 14 mod. Anyone know what part numbers are on the ecu since it has been recalled? I have to check if mine is really the new... -
Pictures from data logger...Leave a comment:
-
Some pictures...Leave a comment:
-
Hello. Have now done some research on the engine and taken some pictures of sds. Was a bit difficult since sds disconnected all the time. Rpm was uneven....Leave a comment:
-
I found a video that shows a bit of the sds problem
https://photos.app.goo.gl/zroxCpbj6ttEuPnS8
https://photos.app.goo.gl...Leave a comment:
-
Thank you for your feedback. It can run nicely at 2000 rpm for a few seconds before it varies and stabilizes. It mostly goes down about 150 rpm. As far...Leave a comment:
-
One more thing is that when the speed is increased from 700 rpm to 1500/2000 rpm it becomes unstable. This is also noticeable when it is in gear. Unstable...Leave a comment:
-
Thanks for the feedback Redlowrey and Mooligther. Bought the engine new and is a 115a 2014 and about 500 hours. Iac and ecm were replaced when the engine...Leave a comment:
-
Hello. I read the thread where Redlowrey took this with low map sensor pressure, which made me think of my map sensor. Is unfamiliar with tagging on the...Leave a comment:
-
Thanks for the feedback Moonligther I have had the engine diagnosed by a suzuki mechanic and he says everything is ok. But the spark plugs and engine...Leave a comment:
-
Spark plugg 100 hr...Leave a comment:
-
Slightly higher speed...Leave a comment:
No activity results to display
Leave a comment: