DF50 2008 spark plug removal

[attjos]

Hi,

I have a DF50 year 2008. Can someone indicate the steps required to remove a spark plug. I uncliped the wiring and unscrewed a single bolt holding the plug using a 13mm socket. Next, I tried to pull the coil out with my hands however it did not come out.

I must say that I did not apply too much force, since I was not sure if I was missing another step. Before I re-attempt to take it out with a larger force, can you please confirm that I am not missing other steps so as not to make any damage?

thanks
Jose

[attjos]

Ok I managed to figure it out. Actually you have to undo a second bolt for each plug. This is located at a slightly deeper level, just underneath the coil cap. I used a 5/16 socket for this.