DT65 lower unit re-assembly

[Shawn407]

Hi all, I took down lower unit to change the impeller because i noticed no water was coming out the little spray nozzle like it used to. So after replacing that part i tilted the unit during re assembly and 1 small ball bearing fell out and i couldn't figure out were it goes. Can anyone help me?

Im at the point were if anyone wants to fix it up for me i will pay for your services. Boat is dry parked at beach house in New Smyrna beach Fl.

[mphelle8vld]

The shift linkage must be disconnected under the bottom carb. If the shift rod was pulled out of the lower unit, the lower unit must be disassembled to replace the detent ball.