Tweet
2000 70 HP Suzuki outboard, when engine is running there is no water spitting from engine ( pee hole ) is this a problem?? There is no overheating issues at all
-
-
Maybe some mud stuck in there. Get a piece of heavy nylon weed trimmer line and poke it in there, should be able to clear it. Might need to have the hose on the flush attachment at the same time to help dislodge and rubbish.
Also if it is not peeing when on the earmuffs, then its probably because of not enough water pressure. Dual feed earmuffs are better. -
kcoles5466
Thank you for your help, I ended up taking the small hose leading to pee hole and blowing thru and removing sand, needed to do this more than once, I now have a good flow which is what we were after
Thank you for your imputComment
-
since you had sand in the system.. you might also want to
pull the thermostat and make sure all the sand has been cleaned out..
maybe to the extent of running it for a few minutes with out the thermostat
to be sure it is all flushed. .then re-install it.Comment
Comment