Buy Suzuki Outboard Parts

Announcement

Collapse
No announcement yet.

DF70 - access to battery cable connection

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • artdf175
    replied
    That is very good.. glad to point you in the right direction
    Art

    Leave a comment:


  • Chernikit
    replied
    Originally posted by artdf175 View Post
    First I don't know your specific engine
    But cowling on my 175 are pretty simple to remove
    A 9 or 10 mm deep socket or something very close to that should remove the bolts that hold the pieces together With my engine the top half comes off first
    Bottom half removed is needed on mine engine to get to oil filter
    Cables should terminate on the starter and starter relay
    Would suggest getting desktop service manual
    Art

    Thanks, Art, your advice is much appreciated - have found an online source for service manual & downloaded it. Things are much clearer now.

    Regards - Nick

    Leave a comment:


  • artdf175
    replied
    First I don't know your specific engine
    But cowling on my 175 are pretty simple to remove
    A 9 or 10 mm deep socket or something very close to that should remove the bolts that hold the pieces together With my engine the top half comes off first
    Bottom half removed is needed on mine engine to get to oil filter
    Cables should terminate on the starter and starter relay
    Would suggest getting desktop service manual
    Art

    Leave a comment:


  • Chernikit
    started a topic DF70 - access to battery cable connection

    DF70 - access to battery cable connection

    Hi - question from a newbie - I have a 2008 DF70 which I've just begun to understand - how do I access the location on the engine where the battery cables are connected? It appears as though it's somewhere hidden under the bottom half of the cowling, which doesn't look to be all that simple to remove. It also looks like that has to be removed to change the oil filter as well - is this right?
    Alternatively, assuming the cables connect to the starting motor & that's under the flywheel cover - how does that come off? It has one bolt, OK, but seems to be attached via three other rubber/plastic studs. do you just pull it off these? Don't want to use too big a hammer on this ;-)

    Thanks - Nick
    Last edited by Chernikit; 08-09-2014, 05:57 PM.
Working...
X