1980 Spirit 65

[xtremedetail]

I have a 1980 Spirit 65 with manual tilt and I just wired my ignition switch because I could not find a wiring harness. Anyway i wired it all up and now I have no spark. I believe I wired it right but I'm not sure. Brown to S, White to B, Blue/Red stripe to I, Black to M, orange to C. Brown is N. Safety, White is Batt Charge, Blue/Red stripe is L/R and it comes from the P.E.I. unit, Black is a ground to the motor, and Orange is choke. Everything works except ignition. Could someone point me in the right direction.

[xtremedetail]

I still have no spark. I have no power going to the coil. Any suggestions?

[Flandersab]

Realizing that this post is 10 years old, it may be too optimistic to hope you see this... but what was the fix for this?