Tweet
So, my rectifier was not charging, but stator was outputting 29V.
at a point the system was giving me the 1-1 alarm (double buzz), so i replaced the rectifier, now im getting 15V at the output of the rectifier at idle.
buuut im still getting a 1-1 buzz alarm at the startup, I get the normal light cycle and first beep before cranking, then after cranking another beep, no other lights. First I thought it could be not regulating with overcharge, but no, i disconnected the cable coming out of the rectifier and measured 15V dc.
Any clues? Or is it that the alarm should go away later? Or any way to reset it??
Thanks
at a point the system was giving me the 1-1 alarm (double buzz), so i replaced the rectifier, now im getting 15V at the output of the rectifier at idle.
buuut im still getting a 1-1 buzz alarm at the startup, I get the normal light cycle and first beep before cranking, then after cranking another beep, no other lights. First I thought it could be not regulating with overcharge, but no, i disconnected the cable coming out of the rectifier and measured 15V dc.
Any clues? Or is it that the alarm should go away later? Or any way to reset it??
Thanks