Tach Lights

[eb911sc]

I just installed a 2003 DF 70. Hooked up all the tagged wires and have everything working except for the two of the 3 monitor lights. When I turn the key on the tach needle does not move and only the rev limit lights up. Starts right up, trim, kill, hour meter, buzzer all work. Tach needle does not move. Any ideas?

[catacom225]

Go back and double check your wiring, I had the same issues. As for the needle, i assume my Tach is bad as i needed to give it a tap to get it to work, now it's given up altogether