Propeller shaft assembly for a DF115a, 2015.

[Strokeit]

Hi everyone
Looking for a propeller shaft assembly for a DF115a, 2015.

I have tried all the recommended shafts for it, i.e.
[ ] 57610-92J00
[ ] 57610-92j20

But they don't fit. Does you have any idea what other shaft it could be? 57610-92J00 is close however the clutch end or opening of the shaft is too narrow for the connector pin. Someone has suggested 57610-90J00 but I can't get my hands on one to compare.

Cheers20211221_161643.jpg

[mlee76]

If the problem is that the shaft is bent, with V blocks a dial micrometer and a press you can straighten it. I bought 2 df90a motors with bent shafts and straightened them this way. They are fine and it's much cheaper than buying a new shaft.

[briscoe]

I believe you can locate the proper shaft by looking up the parts on this site. I have seen the different prop shaft on a DF115, from 02 or there abouts. They were smaller diameter coming out of the seal. Looking up the difference between part numbers for a 115 compared to a 140 will show you the part number. They are the same part for both engines except for a few years. I think 2002-05. I dont recall and am on phone, computer based search is much faster.

[catacom225]

Yep I took a bent shaft to a machine shop and they straighten it out

[Moonlighter]

Have a look here

https://www.boats.net/catalog/suzuki...on-df115at-e03