Buy Suzuki Outboard Parts

Announcement

Collapse
No announcement yet.

Suzuki DF 150 2006 tilt and trim

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Suzuki DF 150 2006 tilt and trim

    I have a 2006 Proline with twin DF150. The Starboard engine will trim down but not up. Port engine works as should. Batteries are fully charged. All wiring seems to be intact.

    Any ideas what might be wrong ?

    Where are the PTT relays located ?

    Thanks for your help!

  • #2
    Have you tried trimming up from the remote and the switch on the engine and got same results?

    Comment


    • #3
      it could very well be the trim switch on the port side of the engine
      i removed mine and found salt water had corroded the inside
      fix it long enough to get a new one to replace it
      Art

      Comment


      • #4
        It's also possible that something hit the trim limit switch cam and knocked it out of kilter. That happened to me once when I was greasing the tilt axle. It will slip out of position pretty easily. It hits the limit switch and prevents it from going up at all. Slips back in line just as easy.

        You know where it is and how to adjust it, right?
        Last edited by Harper; 09-14-2017, 07:42 AM.
        Mike
        μολὼν λαβέ

        Comment


        • #5
          There's no oil leak?
          Regards, Martin
          DF200 2007

          Comment

          Working...
          X