Cam position sensor

[Zuke03]

I have a 2003 DF140 . . .get 2-4 code (cam position sensor) . . .replaced sensor, but still get the code. Motor starts right up and runs smoothly, but cannot clear the code. Any suggestions?

[wilbur1]

Maybe disconnecting the Bat. might do it. Works on cars. Or it might have to be done on the computer. One of these guys will help Im sure.

[Zuke03]

Wilbur,thanks . . .tried that. I read somewhere that the ECU "should" recognize the new part. But, no.

[redlowrey]

I have a 2003 DF140 . . .get 2-4 code (cam position sensor) . . .replaced sensor, but still get the code. Motor starts right up and runs smoothly, but cannot clear the code. Any suggestions?

''''''It won't clear if the problem is still there, check the wiring and make sure it is working. It is a three wire sensor and has a power, signal, and ground.