Tweet
I saw the sticky at the top, but there is alot of content in there. I'm wanting to hook my df150 up to my Lowrance. I've got a Nmea 2000 hooked up and added an smis engine interface v3.5 990C0-88149-357. I tried to hook it up under the console and on the side of the motor, either I bought the wrong cable or I'm short an adapter because i didn't get a reading and everything else shows up on the backbone. Any help would be appreciated.
-
-
https://www.suzukioutboardforum.com/...fetch?id=44592
from the nmea sticky at the top, looks like I'm just short one sds cable.
Additionally it looks like this is what's up under the console. OEM Single Engine Adapter 990C0-88131Last edited by Madwall88; 03-08-2022, 02:17 PM. -
The resident expert will want the year of the engine.Comment
-
It is a 2018Comment
-
Is your 150 fly by wire (G model) or cable controls?
This adapter needed for the G model
https://www.brownspoint.com/store/pc...r-38p63576.htm
This adapter needed for the mechanical/cable control engine
https://www.brownspoint.com/store/pc...S-38p63581.htm
In both cases the adapter is plugged into the SDS plug on the engine and run thru the rigging tube back into the boat. The interface is connected to the other end.
Comment
Comment