High Fuel Flow Reading

[HenryO]

Have version

Ok, from the systems information page,
- LMF 400 VER 1.0.0 BUILD CA 1319
from NMEA page,
- NMEA VER 1.200

Thanks for the help all!

[Moonlighter]

Ok, from the systems information page,
- LMF 400 VER 1.0.0 BUILD CA 1319
from NMEA page,
- NMEA VER 1.200

Thanks for the help all!

Ok, thanks forthat info, but, as mentioned previously, neither of those are the Suzuki interface version.

In any case, I think that either your Interface cable has failed, or its software has developed a major glitch.

There really are only 2 options for you now.

First, get someone to reinstall Interface software version 2.5.0 for you. Suzuki dealer can do this. Or, if you have a Lowrance HDS or Simrad display on the network, or can get a loan of one of them or a Suzuki C-10 gauge, it can be done via them quite easily. If would try this option first as it is pretty easy and not expensive. You can download a copy of interface V2.5.0 software from the sticky thread on Suzuki nteworks on this forum.

Option 2 is replace the interface cable. The difficulty is getting one that runs the older software version that you MUST use to get correct engine and fuel data from your engine. You can often get them (used) from Interntaional Marine in Florida. But make sure you tell them your engine serial number and year.