DT40 Cowling Clip/Latch

[oceanearth]

I need to replace a broken upper section of my DT40 Cowling Clip/Latch (see pic) but I can't find the part number or even name anywhere. Any help pls? 20230319_075016.jpg

[Moonlighter]

Follow this link to the parts section on this website. Locate your engine from the menu.

https://www.boats.net/catalog/suzuki/outboard

[Solarman]

You need to select 40hp first. Then you will need to scroll down to your year and model number.

[oceanearth]

I've had a look at these parts lists, but they only have the bottom part of the fastener. I need the top part that the latch clips down on. You can see in the pic where the two rivets that hold it on are broken.

[Solarman]

I think the part that you want is called a "hook", and displayed on the "engine cover" picture? The "fastener" is the shown on the "lower cover" or "side cover" picture depending on what motor you have?

But, without the year, and model number, of your specific motor it would be hard to give you a part number?


Good luck.

[oceanearth]

Thanks mate, that sounds like it makes sense. It's a 2013 Suzuki DT40wr. I have the manual. It has the fastener part in the diagram for the lower cover but no hook in the diagramfor the upper cover. There's just nothing there for the fastener to fasten on to. Screenshot_20230322_024135_Drive.jpgScreenshot_20230322_024111_Drive.jpg See pics.

[cprice11]

"Might try making one from a bent piece of sheet metal , 1/8" thick aluminum

[oceanearth]

Yeah mate, that's what I was gonna with as a last resort.

[Pbodsw]

Looks like a shared component with other engines of that era. Look at the parts list for a 2007 DF50

[Moonlighter]

61642-90L00 Is a part shared by many smaller Suzuki motors.

Heck for less than $5, order one and see if it fits!!